Arduino Pro Mini Compatible

ATMEGA328P-AU Quad Flat Package. Arduino Nano Compatible Board No USB Support (Use USB to RS232 TTL Converter to program). Supports Auto Reset Reverse Polarity Protection Max 150 mA Output Over Current Protection Input: 5 - 12 V DC Power, Status LED Indicator 33 x 18 x 6 mm Package Include 1 Piece Arduino Pro Mini Nano ATMEGA328P-AU 5V 16M (16MHZ) Board Module For Arduino Uno Nano Compatible

Arduino Due Compatible

1 x SAM3X8E 32bit ARM CONTEX-M3 DUE R3 BOARD CONTROL BOARD with USB of ARDUINO - NO USB cable This is Clone Board based on SAM3X8E 32bit ARM CONTEX-M3 Board Highest Quality. 100% Arduino-Compatible. It is built with High quality Components and Board looks like Original. This is a 100% compatible derivative of current R3 Arduino Mega 2560. This is an Arduino Clone based on current open source hardware!.We are not affiliated with Arduino.cc Technical Specification A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM 512KBytes of flash memory for code A DMA controller, that can relieve the CPU from doing memory intensive tasks. Specifications: Microcontroller: AT91SAM3X8E Operating voltage: 3.3V Input voltage(recommended): 7V - 12V Input Voltage (limits): 6-16V Digital I / O pins: 54(of which 12 provide PWM output) Analog input pins: 12 Analog outputs pins: 2(DAC) Total DC output current on all I / O lines: 130mA DC current for 3.3V pin: 800mA Flash memory: 512KB all available for the user applications SRAM: 96KB(two banks: 64KB and 32KB) Clock speed: 84MHz *Warning: Unlike other Arduino boards, the Due board runs at 3.3V. The maximum voltage that the I / O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I / O pin could damage the board. Package Contains: 1 x SAM3X8E 32bit ARM CONTEX-M3 DUE R3 BOARD 1 x USB Cable (Blue Color High Quality)

Mega 2560 R3 Compatible Board with Arduino Mega 2560

We program & test all devices with LED blinking Program. Please make sure to connect the device to USB & test if the LED-"L" is blinking, This shows the device is working perfectly (Don't modify program without completing this preliminary test). Usage Instructions: Install CH340 USB Driver (Download: http://goo.gl/NWEz9O ) Install Arduino IDE (Download: http://arduino.cc/en/Main/Software ) Connect Board to Computer & Launch Arduino IDE. Select board as "Mega 2560" in Arduino IDE. Select the COM port (You can know COM Port No. in Control Panel > Device Manager). Start burning your programs. Technical Details: Uses Atmel ATmega2560 Microcontroller Operating Voltage: 5V Input Voltage: 7V - 12V Digital I/O Pins: 54 (15 pins provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin 50 mA Flash Memory: 256 KB (8 KB used by bootloader) SRAM: 8 KB EEPROM: 4 KB Clock Speed: 16 MHz CH340G for USB Communication Package Content: 1 X Arduino Mega 2560 R3 Compatible Board with ATmega2560 - CH340G. 1 X USB Cable

UNO R3 Compatible

This is the new Fully 100% compatible derivative version of Uno R3 based on current open source hardware. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). Note: The Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes! Features: ATmega328 microcontroller Input voltage - 7-12V 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs 32k Flash Memory 16Mhz Clock Speed


Leave a Reply

Vibration Sensor

Description: 1) can detect vibration or tilt. 2) Operating voltage 3.3V-5V. 3) Digital switching outputs (0 and 1) 4) with fixed bolt hole for easy installation 5) small board PCB size: 3cm * 1.6cm 6) Power LED (red) and the digital switch output indicator (green) 7)using LM393 comparator chip

Ultrasonic Ranging Module HC - SR04

Product features: Ultrasonic ranging module HC - SR04 provides 2cm - 40cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules includes ultrasonic transmitter, receiver and control circuit. The basic principle of work: (1) Using IO trigger for at least 10us high level signal, (2) The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back. (3) IF the signal back, through high level , time of high output IO duration is the time from sending ultrasonic to returning. Test distance = (high level time?velocity of sound (340M/S) / 2. Interfacing Pins: -> 5V Supply -> Trigger Pulse Input <- Echo Pulse Output -> 0V Ground Electric Parameters: Working Voltage DC 5 V Working Current 15mA Working Frequency 40Hz Max Range 40cm Min Range 2cm MeasuringAngle 15 degree Trigger Input Signal 10uS TTL pulse Echo Output Signal Input TTL lever signal and the range in proportion Dimension 45*20*15mm

Temperature Senor LM35

Precision Centigrade Temperature Sensors General Description: The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ?Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ? ? ?C at room temperature and ? ? ?C over a full -55 to +150?C temperature range. Low cost is assured by trimming and calibration at the wafer level. The LM35's low output impedance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy. It can be used with single power supplies, or with plus and minus supplies. As it draws only 60 mA from its supply, it has very low self-heating, less than 0.1?C in still air. The LM35 is rated to operate over a -55 to +150?C temperature range, while the LM35C is rated for a -40 to +110?C range (-10? with improved accuracy). The LM35 series is available packaged in hermetic TO-46 transistor packages, while the LM35C, LM35CA, and LM35D are also available in the plastic TO-92 transistor package. The LM35D is also available in an 8-lead surface mount small outline package and a plastic TO-202 package. Features: Y Calibrated directly in ? Celsius (Centigrade) Y Linear a 10.0 mV/?C scale factor Y 0.5?C accuracy guaranteeable (at +25?C) Y Rated for full -55? to +150?C range Y Suitable for remote applications Y Low cost due to wafer-level trimming Y Operates from 4 to 30 volts Y Less than 60 mA current drain Y Low self-heating, 0.08?C in still air Y Nonlinearity only ? ? ?C typical Y Low impedance output, 0.1 ohm for 1 mA load

Rain Drop Sensor

Operating Voltage: 5V power LED indicator, & output signal LED indicator. TTL-level output, Driving capability 100mA, It can directly drive relays, buzzer, small fans, etc. Sensitivity can be adjusted via potentiometer Raindrop Sensor Board and control panel Board are separate, easy to wire leads. A large area of very sensitive rain board, more conductive are to detect rain. Board with positioning holes to facilitate mounting panel board size: 3 * 1.6 MM large raindrop detection plate 5.4mm * 4.0mm (Nickel Coated Sensor Boards with 0.5 micron build up, hence long life, no corrosion and no oxidization.)

PIR Sensor

General Description: The PIR (Passive Infra-Red) Sensor is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin. Features: > Single bit output > Small size makes it easy to conceal > Compatible with all Parallax microcontrollers Application Ideas: > Alarm Systems > Halloween Props > Robotics

Peltier with Heatsink and fan

Device that transfers heat from one side of the body to the other side of the body and there by making one side of the body extremly cold (ice formation may happen depending on the current supplied and the room temperature) and other side of the body gets hot. (Heat dissipation is required in order to protect the module from getting damaged).

Peltier TEC1-12706

Device that transfers heat from one side of the body to the other side of the body and there by making one side of the body extremly cold (ice formation may happen depending on the current supplied, type of heat sink used and the room temperature) and other side of the body gets hot. (Proper Heat dissipation is required in order to protect the module from getting damaged).

Light Sensor

Light Intensity Sensor: Module Features: 1, Using photosensitive resistance sensor or (LDR) Light Dependent Sensor. 2, Driving ability, more than 15mA. 3, With adjustable potentiometer can adjust the light intensity detected. 4, Working voltage 3.3V-5V. 5, Output Type: Digital switching output (0 and 1) and Analog Output. 6, With bolt holes for easy installation. 7, Small PCB size : 3.2cm x 1.4cm 8, Using a wide voltage LM393 comparator. 1, Photoresistor module most sensitive to ambient light, generally used to detect the brightness of the ambient light, triggering microcontroller or relay module; 2, When the outside ambient light intensity exceeds a set threshold, DO-ended output will be low; 3, DO output can be directly connected with the microcontroller to detect high and low, thereby detecting ambient light levels change; 4, the output can directly drive DO OUR relay module, which can be composed of a light control switch.

Humidity Sensor

Resistance HR202 Humidity Sensor: HR202 humidity resistance sensor is made up of organic polymer materials, it has very good humidity sensing range, stable performance, long-term use, can be used in warehousing, cars, indoor air quality control, building automation, medical, industrial control systems and wide range of applications such as scientific research. Technical parameters: parameters (at 1kHz) Unit: ohm operating range 20 ... 95% RH 0 ... 60 ?. Humidity detection accuracy of ? 5% RH. Description: 1) can detect ambient humidity. 2) adjustable sensitivity (shown in blue digital potentiometer adjustment) 3) Operating voltage 3.3V-5V. 4) output from a) 5 analog voltage output. b) Digital switching outputs (0 and 1) 5) with fixed bolt hole for easy installation 6) small board PCB size: 3cm * 1.6cm 7) Power LED (red) and the digital switch output indicator (green) 8)using LM393 comparator chip, Application: Used to display temperature and humidity, Atmospheric environmental monitoring, industrial process control, agriculture, surveying instruments etc. 1) Humidity resistance module most sensitive to environmental. 2) When the external environment humidity exceeds the set threshold, the module D0 output is low. 3) Digital output D0 can be directly connected with the microcontroller to detect high and low, thereby detecting environmental humidity changes; 4) Can drive relay module directly, which can be composed of a wet control switch. 5) It also has analog output.

Price : 425 350

Humidity & Temperature Sensor DHT 11

This DHT11 Temperature & Humidity Sensor features a temperature & humidity sensor complex with a calibrated digital signal output. By using the exclusive digital-signal-acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability. This sensor includes a resistive-type humidity measurement component and an NTC temperature measurement component, and connects to a highperformance 8-bit microcontroller, offering excellent quality, fast response, anti-interference ability and cost-effectiveness. Each DHT11 element is strictly calibrated in the laboratory that is extremely accurate on humidity calibration. The calibration coefficients are stored as programmes in the OTP memory, which are used by the sensor's internal signal detecting process. The single-wire serial interface makes system integration quick and easy. Its small size, low power consumption and up-to-20 meter signal transmission making it the best choice for various applications, including those most demanding ones. The component is 4-pin single row pin package. It is convenient to connect.

Price : 500 400

Flex Sensor 2

Product Specs: Features: - Angle Displacement Measurement - Bends and Flexes physically with motion device - Possible Uses - Robotics - Gaming (Virtual Motion) - Medical Devices - Computer Peripherals - Musical Instruments - Physical Therapy - Simple Construction - Low Profile Mechanical Specification: -Life Cycle: >1 million -Height: 0.43mm (0.017") -Temperature Range: -35?C to +80?C Electrical Specification: -Flat Resistance: 10K Ohms -Resistance Tolerance: ?30% -Bend Resistance Range: 60K to 110K Ohms -Power Rating : 0.50 Watts continuous. 1 Watt Peak.

Price : 750 650

Colour_Sensor_TCS3200

The TCS3200 and TCS3210 programmable color light-to-frequency converters that combine configurable silicon photodiodes and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance). Features: High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency Communicates Directly With a Microcontroller Single-Supply Operation (2.7 V to 5.5 V) Power Down Feature Nonlinearity Error Typically 0.2% at 50 kHz Stable 200 ppm/?C Temperature Coefficient Low-Profile Lead (Pb) Free and RoHS Compliant Surface-Mount Package

Price : 400 500

BMP085 Digital Pressure Sensor

The BMP085 is the fully pin- and function compatible successor of the SMD500, a new generation of high precision digital pressure sensors for consumer applications. The universal C-code SMD500/BMP085 (?BMP085_SMD500_API?) is fully upward compatible to SMD500 and recognizes automatically the device ID. The ultra-low power, low voltage electronics of the BMP085 is optimized for use in mobile phones, PDAs, GPS navigation devices and outdoor equipment. With a low altitude noise of merely 0.25m at fast conversion time, the BMP085 offers superior performance. The I2C interface allows for easy system integration with a microcontroller. The BMP085 is based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. Key features Pressure range: 300 ... 1100hPa (+9000m ... -500m above sea level) Supply voltage: 1.8 ... 3.6V (VDDA) and 1.62V ... 3.6V (VDDD) Low power: 5?A at 1 sample / sec. in standard mode Low noise: 0.06hPa (0.5m) in ultra low power mode 0.03hPa (0.25m) ultra high resolution mode < 0.1m possible with software averaging algorithm - Temperature measurement included - I2C interface - Fully calibrated New features Smaller package height 1.2mm Faster conversion time (standard mode each) 7.5ms (max.) Faster I2C data transfer max. 3.4MHz max. Extended min. supply voltage min. 1.8V min. Lower stand-by current (typ.) 0.1?A External clock not necessary Typical applications ? Enhancement of GPS navigation (dead-reckoning, slope detection, etc.) ? In- and out-door navigation ? Leisure and sports ? Weather forecast ? Vertical velocity indication (rise/sink speed)

Price : 1025 900

Analog Gyroscope LPY530AL

MEMS motion sensor: Dual Axis Pitch and Yaw ?300?/s Analog Gyroscope LPY530AL The LPY530AL is a low-power two-axis micromachined gyroscope able to measure angular rate along pitch and yaw axes. It provides excellent temperature stability and high resolution over extended operating temperature range (-40?C to +85?C). The LPY530AL has a full scale of ?300 ?/s and is capable of detecting rates with a -3 dB bandwidth up to 140 Hz. The gyroscope is the combination of one actuator and one accelerometer integrated in a single micromachined structure. It includes a sensing element composed by single driving mass, kept in continuos oscillating movement and able to react when an angular rate is applied based on the Coriolis principle. A CMOS IC provides the measured angular rate to the external world through an analog output voltage, allowing high level of integration and production trimming to better match sensing element characteristics

Price : 900 700

ADXL345

ADXL345 module triaxial accelerometer module I2C / SPI Communication, digital accelerometer module tilt Sensor. Module Power supply :3-5V, Communication: IIC / SPI, Module size: 19mm x 14mm. The ADXL345 is a small, thin, low-power 3-axis accelerometer with high resolution (13), measuring range up to ? 16g. The digital output data is 16-bit two's compliment format, through the SPI (3-wire or 4-wire) or I2C digital interface. ADXL345 is well suited for mobile device applications. It can be measured in tilt-sensing applications, static acceleration of gravity, you can also measure the motion or shock caused by dynamic acceleration. Its high resolution (4 mg / LSB), capable of measuring less than 1.0 ? tilt angle. The device offers a variety of special detection. Active and inactive motion detection function detects whether the occurrence and acceleration on any axis exceeds a user-set limits. Tap sensing detects and double-click action. Freefall Detection function detects the device is falling. These functions can be mapped to two interrupt output pin in one. The patent-pending 32 FIFO (FIFO) buffer can be used to store data to minimize host processor intervention. . PCB board sided gold-plated

Price : 950 850

Accelerometer ADXL335

The ADX335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of +/-3 g. It can measure the static acceleration of gravity in tiltsensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. Features: 3-axis sensing. Low power - 350 ua (typical). Single-supply operation 1. 8v to 3. 6v (built in regulator on the pcb for the input of 5v). Analog data output. 10,000 g shock survival. Excellent temperature stability. Bw adjustment with a single capacitor per axis. Rohs/weee lead-free compliant.

Price : 650 500