Arduino

Mega 2560 R3 Compatible Board with Arduino Mega 2560

We program & test all devices with LED blinking Program. Please make sure to connect the device to USB & test if the LED-"L" is blinking, This shows the device is working perfectly (Don't modify program without completing this preliminary test). Usage Instructions: Install CH340 USB Driver (Download: http://goo.gl/NWEz9O ) Install Arduino IDE (Download: http://arduino.cc/en/Main/Software ) Connect Board to Computer & Launch Arduino IDE. Select board as "Mega 2560" in Arduino IDE. Select the COM port (You can know COM Port No. in Control Panel > Device Manager). Start burning your programs. Technical Details: Uses Atmel ATmega2560 Microcontroller Operating Voltage: 5V Input Voltage: 7V - 12V Digital I/O Pins: 54 (15 pins provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin 50 mA Flash Memory: 256 KB (8 KB used by bootloader) SRAM: 8 KB EEPROM: 4 KB Clock Speed: 16 MHz CH340G for USB Communication Package Content: 1 X Arduino Mega 2560 R3 Compatible Board with ATmega2560 - CH340G. 1 X USB Cable

Rating:
Contact Seller
X

Ask Seller

    • param1
    • param2

Leave a Reply