Wireless

Xbee- CC2500 tranceiver Modem

RFTransmitter & Reciever 433Mhz with Encoder and Decoder Boards

Ready to use with 8 bit Microcontrollers . Input power supply- 5v 4 data lines connected to Burgstick . Test switch on each Data bit . Output LED's on each Data bit . Frequency 433Mhz.

Blue Tooth HC-05 Serial with Supply

HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, with DB9 Female UART Connector, 5v to 12v AC/DC power, External 3.3v Supply (Optional), TTL interface, Paired LED Indicator, Work Mode LED Indicator, Power Indicator and Slide switch to switch between, Communication mode and AT Mode. designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio ransceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency opping Feature). Hardware features: Typical -80dBm sensitivity Up to +4dBm RF transmit power Low Power 1.8V Operation ,1.8 to 3.6V I/O PIO control UART interface with programmable baud rate With integrated antenna With edge connector. Software features: Default Baud rate: 38400, Data bits:8, Stop bit:1,Parity:No parity, Data control: has. Supported baud rate: 9600,19200,38400,57600,115200,230400,460800. Given a rising pulse in PIO0, device will be disconnected. Status instruction port PIO1: low-disconnected, high-connected; PIO10 and PIO11 can be connected to red and blue led separately. When master and slave are paired, red and blue led blinks 1time/2s in interval, while disconnected only blue led blinks 2times/s. Auto-connect to the last device on power as default. Permit pairing device to connect as default. Auto-pairing PINCODE:?0000? as default Auto-reconnect in 30 min when disconnected as a result of beyond the range of connection.

RF Transmitter & Reciever 433Mhz

The RXD1is a miniature receiver module that receives On-off keyed ( OOK )modulation signal and demodulated to digital signal for the next decoder stage. Local Oscillator is made of LCstructure. The result is excellent performance in a simple-to-use ,with a low external component count. The RXD1 is designed specifically for remote-control and wireless security receiver operating at 315/434Mhz. The TXC1 is an ASK transmitter module .The result is excellent performance in a simple-to-use .The TXC1 is designed specifically for remote-control , wireless mouse and car alarm system operating at 315/433.92 MHz.

Blue Tooth HC-05 Module

HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio ransceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency opping Feature). Hardware features: Typical -80dBm sensitivity Up to +4dBm RF transmit power Low Power 1.8V Operation ,1.8 to 3.6V I/O PIO control UART interface with programmable baud rate With integrated antenna With edge connector. Software features: Default Baud rate: 38400, Data bits:8, Stop bit:1,Parity:No parity, Data control: has. Supported baud rate: 9600,19200,38400,57600,115200,230400,460800. Given a rising pulse in PIO0, device will be disconnected. Status instruction port PIO1: low-disconnected, high-connected; PIO10 and PIO11 can be connected to red and blue led separately. When master and slave are paired, red and blue led blinks 1time/2s in interval, while disconnected only blue led blinks 2times/s. Auto-connect to the last device on power as default. Permit pairing device to connect as default. Auto-pairing PINCODE:?0000? as default Auto-reconnect in 30 min when disconnected as a result of beyond the range of connection

Blue Tooth HC-05

HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio ransceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency opping Feature). Hardware features: Typical -80dBm sensitivity Up to +4dBm RF transmit power Low Power 1.8V Operation ,1.8 to 3.6V I/O PIO control UART interface with programmable baud rate With integrated antenna With edge connector. Software features: Default Baud rate: 38400, Data bits:8, Stop bit:1,Parity:No parity, Data control: has. Supported baud rate: 9600,19200,38400,57600,115200,230400,460800. Given a rising pulse in PIO0, device will be disconnected. Status instruction port PIO1: low-disconnected, high-connected; PIO10 and PIO11 can be connected to red and blue led separately. When master and slave are paired, red and blue led blinks 1time/2s in interval, while disconnected only blue led blinks 2times/s. Auto-connect to the last device on power as default. Permit pairing device to connect as default. Auto-pairing PINCODE:?0000? as default Auto-reconnect in 30 min when disconnected as a result of beyond the range of connection


Leave a Reply